HF STATIONARY READER

HF NFC READER

ID CPR02.10-AD/-B

The ID CPR02.10-AD / -B is designed as a wall mountable card reader for contactless data exchange with common ISO 14443-A & -B and ISO 15693 Transponders. Typical applications are Access Control and Time  Attendance.

The card reader requires an external power supply. For the data exchange to a computer or Host system the following communication links are available: Serial (RS232 or RS485) or Data/Clock (Wiegand).

 

Scope of Delivery:
- Card Reader ID CPR02.10-AD or ID CPR02.10-B
- Wall-mounted housing for surface mounting
- Installation Manual


TECHNICAL DATA

Dimensions                         

  Card Reader                    84 x 84 x 22 mm // 3.31 x 3.31 x 0.87 inch

  Wall-mounted housing      78 x 78 x 18 mm // 3.07 x 3.07 x 0.71 inch

Housing                               Plastic (ASA) / Front: Acrylic Glass

Color                                   white & black (front)

Weight                                 approx. 150 g / 5.3 oz

Protection Class                  IP 54
Temperature Range             Operation: –25 °C to 60 °C
                                           Storage:    –40 °C to 85 °C  

Relative Humidity                 95 % (not condensing)

MTBF                                  338,000 h

Supply Voltage                    12-24 V AC / DC

Power Consumption             max. 2.6 W

Communication Links

  ID CPR02.10-AD              RS232 and Data/Clock (Wiegand)

  ID CPR02.10-B                RS485 (max. 32 units on one Bus System)                                                

LED                                     Multi-color (Red/Green/Orange)

RF Power                            250 mW +/- 2 dB
Frequency                           13.56 MHz

Antenna                               internal, ca. 70 mm x 70 mm

Buzzer                                 integrated

Relays                                 1 (only ID CPR02.10-B)

Digital Inputs

  ID CPR02.10-AD              3 (max. 3 m /10 ft cable length)

  ID CPR02.10-B                2 (max. 3 m /10 ft cable length)

Reading Distance                max. 7 cm / 2.75 in*

Supported Transponders   ISO 14443-A1
ISO 14443-B2
ISO 156933
NFC4

1 z.B. mifare® classic (mini, 1k, 4k), mifare® UltraLight, mifare® DESfire, Smart MX,
my-d® proximity, SLE44R35S, SLE55R…, etc., JewelTM
2
z.B. SLE66CL, ST19XR34, RF360 etc.
3 z.B. I-CODE SLI, Tag-it HFI, my-vicinity, STM LRI512 etc.
4 NFC Type 1, 2 and 4 in Read/Write and NFC Card-Emulation-Mode
* Distance depends on transponder used; listed reading distance is for a Transponder Inlet of 76 x 45 mm


 

STANDARD CONFORMITY

 

Radio Approval

  Europe                             EN 300 330

  USA  FCC 47 CFR Part 15

EMV                                    EN 301 489

Safety                                
  Low Voltage                    EN 60950
  Human Exposure             EN 50364
Environment                        WEEE – 2002/96/EC
                                           RoHS – 2002/95/EC