LF Proximity RFID Reader

ID RW02.10

ID RW02.10-AD / -B is designed as a wall-mounted device for contactless data exchange with common 125 kHz transponders for applications like access control and time attendance.

For power supply an external power supply unit is necessary, data exchange with a computer or other equipment is carried out via a serial (RS232 or RS485) or a Data-/Clock interface (Wiegand).

Scope of delivery:
- Card Reader ID RW02.10-AD or ID RW02.10-B
- Wall-mounted housing for surface mounting
- Installation manual


Dimensions (W x H x D)

Card Reader 84 mm x 84 mm x 22 mm

(3.33 in x 3.33 in x 0.87 in)

Wall-mounted housing 78 mm x 78 mm x 18 mm

(3.07 in x 3.07 in x 0.71 in)

Housing Plastic (ASA) / Front: acrylic glass

Color Corpus: white/Front panel: black

Weight approx. 150 g

Protection class IP 54
Temperature range

Operation –25 °C up to 70 °C

Storage –40 °C up to 85 °C

Relative air humidity 95 % (non-condensing)

MTBF 307.000 h

Supply voltage 12-24 V AC / DC

Current consumption max. 2,5 W


ID RW02.10-AD RS232 and Data-/Clock (Wiegand)

ID RW02.10-B RS485 (max. 32 devices / data bus)

LED Bicolor (Red /Green / Orange)

Operating frequency 125 kHz

Antenna integrated, approx. 70 mm x 70 mm

Beeper integrated

Relay 1 closer

Digital inputs 2 (max. cable length 3 m)

Read range maximum 7 cm*

Supported transponders 125 kHz ReadOnly transponders1
125 kHz Read/Write transponders2
Operation modes Polling-Mode & Auto-Answer-Mode

1 For example ID CTxA, H4001, H4002, H4022, Unique, Q5, e5555 etc.

2 For example ID DTxB, ID DTxC, HITAG 1, HITAG S, etc.

* Read ranges depend on the used transponders; here made statements relate on an inlet size of 76 mm x 45 mm (3.00 in x 1.78 in)


Radio approval

Europe EN 300 330

USA FCC 47 CFR Part 15

EMC EN 301 489

Low voltage EN 60950
Human Exposure EN 50364
Environment WEEE – 2002/96/EC
RoHS – 2002/95/EC