HF STATIONARY READER

HF CARD READER WITH INTEGRATED ACCESS CONTROLLER FOR IP BASED SYSTEMS

ID MAX50.10

TECHNICAL DATA    

Dimensions

  Card Reader                               84 mm x 84 mm x 22 mm

  Wall-mounted housing           78 mm x 78 mm x 18 mm

Housing                                          Corpus: Plastic ASA / Front panel: acrylic glass

Color                                              Corpus: white / Front panel: black

Weight                                           approx. 150 g

Protection class                        IP 54

Operating frequency                       13.56 MHz

RF Transmitting power                    250 mW ± 2 dB

Supply voltage                                Power over Ethernet (PoE), IEEE802.3af;
  alternative: ext. power supply 24V up to 48 V DC
± 10%

Current consumption                        maximum 2.6 W (IEEE802.3af  Powered Devices Class: 1)

Supported transponders                  ISO 14443-A(1, ISO 14443-B(2, ISO 15693(3, NFC(4

Antenna                                         integrated, approx. 70 mm x 70 mm

Interface                                         Ethernet 10BASE-T/100BASE-TX, Automatic MDI/MDI-X Crossover correction,
TCP/IP protocol, IPv4

Cable specification                          maximum 100 m CAT-5 cable

LED’s                                             3 x (blue, green and red) with configurable function

Buzzer                                           integrated

Real time clock                               24 h power reserve; Accuracy: ± 2 sec/day

Inputs / Outputs                              ID MAX50.10-RE:

                                                           1 x Relay (normally open contact); contact rating: 24 V AC/DC 1,5 A
ID MAX50.10-E (with
I/O-Extension Board ID CPR.I/O-A):  

                                                           1 x Relay (change-over contact); contact rating: 24 V AC/DC 1,5 A

                                                           2 x digital Inputs

Memory                                          FRAM for user data, 1014 write cycles
                                                      EEPROM for configuration data, 1 Million write cycles

Reading / Writing distance              typical 3 up to 10 cm(5

Temperature range
  Operation                                    –30 °C up to +55 °C
  Storage                                       –40 °C up to +85 °C

Relative air humidity                         95 % (non condensing)

1) z.B. mifare® classic (mini,1k,4k), mifare® UltraLight, mifare® DESfire, Smart MX, my-dTM proximity, my-dTM move, SLE44R35S, etc.

2)  z.B. SLE66CL, ST19XR34, RF360, etc.

3) z.B. I-CODE SLI, my-dTM vicinity, STM LRI512, Tag-it HFI, etc.

4) NFC Type 1, 2 and 4 in NFC Card Emulation Mode

5) Reading distances depend on the used transponders; here made statements relate on an inlet size of 76 x 45 mm (3.00 x 1.78 in)

 

 

STANDARD CONFORMITY

 

Radio license
  Europe                                        EN 300 330

  USA                                            FCC 47 CFR Part 15

  Canada                                       IC RSS-GEN, RSS-210, RSS-212

EMC                                              EN 300 489

Safety
  Low voltage                                EN 60950
  Human Exposure                        EN 50364

Environment                                   RoHS-2002/95/EC

                                                      WEEE-2002/96/EC