RFID Reader for mounted in machines and terminals made of metal

ID CPR46.10

Order description:

ID CPR46.10-USB    RFID Card Reader
ID CPR46.10-4SUSB        RFID Card Reader with 4 SAM

ID CPR46.10 is a robust RFID Card Reader, which can be flush mounted in machines and terminals made of metal.
Equipped with high protection class (IP65) and high impact resistance level (IK10), the reader provides maximum protection against environmental influences and vandalism .

Due to an automatic power management and a very low standby power consumption, the reader is optimally suited for solar- and battery-powered machines and terminals.

Data transfer between reader and host is AES256 encrypted.

Scope of delivery:
- Card Reader ID CPR46.10-USB resp. ID CPR46.10-4SUSB
- Mounting instruction


Dimensions (W x H)             85 mm x 85 mm (visible section after installation)

Housing                               Plastic

Weight                                 approx. 250 g

Protection class                   IP 65 (front); IP30 (back)
Impact resistance level        IK10
Temperature range              –25 °C up to 70 °C (operation)
                                           –40 °C up to 80 °C (storage)

Relative humidity                 95 % (non condensing)

Supply voltage                     5 V DC or 8 V – 42 V DC

Power consumption

  Operation                         500 mA maximum

  Standby-Mode                  approx. 100 µA (5 V input voltage)

Operating frequency            13.56 MHz

RFID interface                     ISO/IEC 14443-A / -B

Antenna                               integrated

Power Management             Automatically, wake-up by card,

                                           wake-up by host

Host interfaces                    USB, RS232, RS232-LVTTL                                                

Smartcard interface             ISO7816 – 4 SAM sockets*

MTBF                                  500.000 hours
Optical indicators
                 4 green LEDs (EMV-Mode) or

                                           green / yellow / red LED

Buzzer                                 integrated

Supported transponders    ISO 14443-A1
ISO 14443-B2

1 e.g. mifare® classic (mini, 1k, 4k), mifare® UltraLight, mifare® DESfire, Smart MX,
my-d® proximity, SLE44R35S, SLE55R…, etc., JewelTM
e.g. SLE66CL, ST19XR34, RF360 etc.
3 NFC Type 1, 2 and 4 in Read/Write and NFC Card-Emulation-Mode
* Read ranges depend on transponder sizes; here made statements relate on inlet size of 76 x 45 mm

*ID CPR46.10-4SUSB, only




Radio approval

  Europe                             EN 300 330

  USA  FCC 47 CFR Part 15

EMC                                    EN 301 489

  Low voltage                     EN 60950
  Human Exposure             EN 50364
Environment                        WEEE – 2002/96/EC
                                           RoHS – 2002/95/EC
Payment                              EMV Level 1 contactless



SDK for Microsoft Windows® and Linux.
(C++, Java, .NET)