HF READER ACCESSORIES

FEIG NFC READER MULTIPLEXER

ID CPR.ANT.MUX.M4

The 4 Channel Multiplexer ID CPR.ANT.MUX-M4 allows connection of up to 4 external antennas to the reader module ID CPR74. Thus it is possible to realize up to 5 reading areas if the internal antenna of the ID CPR74 is also used.

 

The control of each active antenna is done via a simple configuration of the CPR74. Alternatively, the control can be effected via two digital inputs by an external control electronics.

At any time, only one antenna is active - this is indicated by one LED each, which is attached next to each antenna output.

 

Technical data

 

 

ID CPR.ANT.MUX.M4

Weight

12 g

Temperature Range

Operating

-25 °C up to +70 °C (-13 °F up to +158 °F)

Storage

-40 °C up to +85 °C (-40 °F up to +185 °F)

Humidity

 

max. 95 % (not condensing)

MTBF

500 000 h

Power Supply

+5 V DC ± 5 %

Current Consumption

< 40 mA

I/O

Digital Inputs

Low-Pegel:    0 .. 1.0 V
High-Pegel:   3.8 V .. VCC
Pull-Down:    10 kΩ

LED

4 LED (yellow)

Operating Frequency

13.56 MHz

RF Power

Max. 500 mW

Reader connection

U.FL connector

Antenna connection

4 x U.FL connectors for external antennas

EMC

EN 301 489

Safety and Health

EN 62368

Waste and Hazardous Substances

WEEE - 2002/96/EC

RoHS - 2011/65/EC